BLMFC - PERFECT PUTDOWN ADHESIVE, TA-717
- MSDS: BLMFC
- Manufacturer: H B FULLER CO
- Product Name: PERFECT PUTDOWN ADHESIVE, TA-717
- National Stock Number: 8040-00N020829
Product Identification
Product ID:PERFECT PUTDOWN ADHESIVE, TA-717
MSDS Date:12/02/1988
FSC:8040
NIIN:00N020829
MSDS Number: BLMFC
Responsible Party
VADNAIS HEIGHTS, MN 55110
Emergency Phone: 612-481-3300
Info Phone: 612-481-3300
Preparer: JOHN R DOLMAR
Cage: 0HD19
Contractor
Telephone: 612-481-3300
Cage: 0HD19
Ingredients
STODDARD SOLVENT
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 1-10%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM; 9293
ETHYLENE GLYCOL (SARA III)
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 1-10%
OSHA PEL C 50 PPM
ACGIH TLV: C 50 PPM,VAPOR; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HARMFUL IF SWALLOWED. EYE
CONTACT MAY CAUSE IRRIT. PRLNGD/RPTD SKIN CONTACT WITH PRODUCT MAY
CAUSE IRRITATION. INHALATION OF HIGH VAPOR CONCENTRATION MAY CAUSE
DIZZINESS OR HEADACHES. CHRONIC: NO ANTICIPATED CHRONIC EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NO KNOWN EFFECTS ON OTHER
ILLNESSES.
First Aid
First Aid:INGEST: GIVE ONE GLASS OF H2O/MILK. DO NOT INDUCE VOMIT. GET
IMMED MED ATTN. EYE: FLUSH IMMED W/H2O FOR AT LEAST 15 MIN. GET
IMMED MED ATTN. SKIN: WASH AFFECTED AREA WITH SOAP AND WATER.
REMOVE CONTAM INATED CLOTHING AND LAUNDER BEFORE REUSE. INHALATION:
REMOVE TO FRESH AIR. KEEP WARM AND QUIET. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:SCC
Flash Point:>200F,>93C
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, CHEMICAL FOAM, WATER
SPRAY.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY RUPTURE WHEN
EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>200F,>93C
Spec Gravity:1.1381
pH:8.9
Appearance and Odor:LIQUID.
Percent Volatiles by Volume:36(WT)
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:IMCOMPLETE COMBUSTION CAN YIELD LOW
MOLECULAR WEIGHT HYDROCARBONS AND CARBON MONOXIDE.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE, AND
LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.